Products

Spindle Bearings

Angular Contact Spindle Bearings

Angular Contact Spindle Bearings

Angular contact bearings have one ring shoulder partially or totally removed. This allows a larger ball complement than found in comparable deep groove bearings, hence a greater load capacity. Speed capability is also greater.

Angular contact bearings are assembled to a contact angle by varying the radial clearance. Spindle size Barden angular contact bearings have nominal contact angles of either 15° or 25°. The smaller angle delivers better radial capacity and rigidity, the larger angle is better for axial rigidity.

Separable and nonseparable types are available. In a separable bearing (B type), the cage holds the balls in place so that the outer ring assembly (with cage and balls) can be separated from the inner ring.

Separable bearings are useful where bearings must be installed in blind holes or where press fits are required, both on the shaft and in the housing. The separable feature also permits dynamic balancing of a rotating component with inner ring mounted in place, apart from the outer ring and housing.

Angular contact bearings support thrust loads or combinations of radial and thrust loading. They cannot accept radial loads only --a thrust load of sufficient magnitude must be present. An individual angular contact bearing can be thrust-loaded in only one direction; this load may be a working load or a preload.

 
Deep Groove Spindle Bearings

Deep Groove Spindle Bearings

Deep groove ball bearings have full shoulders on both sides of the raceways of the inner and outer rings. They can accept radial loads, thrust loads in either direction, or a combination of loads.

The design of deep groove bearings make them suitable for the addition of closures which help exclude contaminants and retain lubrication. Besides single deep groove bearings with closures, Barden also offers duplex pairs with seals or shields on the outboard faces.

Extra wide, or cartridge width, deep groove bearings are available in Series 9000 for installations requiring lengthy operation without re-lubrication. Series 9000 bearings have more interior free volume and therefore hold more grease.

Deep groove bearings are available in many sizes, with a variety of cage types.

 

Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies. More Information

Accept